How To Use Biometric Fingerprint Scanner In Windows 7

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

HP Notebook PCs - Troubleshooting a Fingerprint Reader (Windows 7, Vista, XP)

The components of the fingerprint-based security system are designed to work on specific reckoner models and with specific operating systems. The fingerprint device driver and the access manager for the original configuration of your computer are available on the HP back up spider web site.

warning:

The drivers and programs available for one model are not compatible and practice not piece of work with other models.

If you cull to change the operating organisation, the default fingerprint reader drivers and programs provided by HP for your computer model might non be compatible, and the fingerprint reader will not work equally a result. When searching for drivers and software, you must apply the specific product number of your calculator. See HP Notebook PCs - Locate the Notebook Product Number or Model Number.

Update the BIOS

If your notebook has a fingerprint reader, then information technology uses a version of BIOS with biometric back up. This allows other hardware and software to support the fingerprint reader. For all-time operation, cheque HP Software and Driver Downloads for BIOS updates for your specific model.

To cheque your current BIOS version:

1. Press the Power push to start the computer, then press the F2 primal and select Organization Information from the listing.

   The BIOS version is displayed.

2. Note the electric current BIOS version.

To look for BIOS updates:

2. Select the operating system currently on the computer, scroll down, and and then expand BIOS.

   The latest BIOS version download is listed.

If the BIOS is up-to-date, see if biometric support is enabled.

Enable biometric support

Some types of BIOS allow you to enable or disable private hardware components. The biometric device is the hardware that controls the fingerprint reader. Depending on the model number of your estimator, in that location are options in the BIOS to turn the biometric device on and off.

To cheque your BIOS for biometric support and enable it:

1. Press the Ability push to commencement the reckoner, and press the F10 key to open the BIOS setup utility.

2. Under System Configuration, expect for a Biometric Device option; if information technology exists, enable it.

3. Press F10 to salve this setting and restart the computer.

If a biometric option does not exist in your BIOS, then the fingerprint reader is always enabled. Adjacent, see if Windows supports the fingerprint reader.

Check for Windows back up

Once BIOS provides access to a device, Windows displays the device name and its associated driver in the Device Director. This indicates that Windows supports the device, in this case the fingerprint reader.

To see if Windows supports the fingerprint reader on your figurer:

1. Click Beginning, type device in the search field, and then select Device Manager from the search results list.

   Figure : Search results list

   

2. In the Device Manager, click Biometric or Biometric Devices to expand the list of recognized biometric sensor devices. The fingerprint sensor is listed as a Validity Sensor or AuthenTec Sensor, depending on the model number of your reckoner.

   Figure : Biometric Validity Sensor

   

3. If there is no Biometric entry, then Windows cannot identify the fingerprint reader hardware. This is considering the hardware may not be installed on the notebook, or it may exist damaged. Contact HP for technical support or repair service.

   If in that location is a Biometric entry, then Windows supports the device.

To make sure the Windows device driver for the fingerprint reader is upward-to-date; follow the steps in Updating the device driver.

Clean the fingerprint reader

You should periodically clean the fingerprint reader sensor to remove clay and oil.

caution:

Practice non use a wet cloth because moisture may damage the sensor. Practise not use a paper towel because the paper may scratch the surface of the sensor.

annotation:

Before using the fingerprint reader, be certain that your fingers are clean.

Wipe the area with a soft material, dampened with an ammonia-based glass cleaner.

Press the sticky side of a piece of agglutinative cellophane record on the sensor and then peel it away to collect the dust and dirt particles.

Update the device driver

The fingerprint reader hardware requires a device driver to let software to control it. For best functioning, check HP Software and Driver Downloads for device commuter updates for your specific model. Depending on the model, HP computers use Validity or AuthenTec drivers.

To update the fingerprint reader device commuter:

1. Identify the version of the fingerprint reader device commuter currently installed. Open the Device Manager, so aggrandize the Biometric listing of recognized sensor devices.

2. Right-click the device, and so select Properties. Select the Driver tab. The driver version is displayed.

   Effigy : Sensor driver version

   

4. Select the operating arrangement currently on the computer, scroll downwardly, so expand Drivers - Keyboard, Mouse and Input Devices. The fingerprint sensor driver is listed. Note the version number and date.

5. If the driver available on the web site is a later version, download and install it. If the installed driver is the same version, right-click the device driver, and and then select Update driver software to refresh the driver.

If your device commuter is up-to-engagement, run across if your admission manager software is compatible with your fingerprint reader.

Update the fingerprint reader software

The fingerprint reader software (usually referred to every bit the access manager software) uses the fingerprint device driver to capture a fingerprint prototype and then control access to the logon accounts that you gear up. Logon accounts contain user's names and passwords for secure applications and web sites that yous register with the access manager. One time a logon business relationship is registered and yous accept enrolled a fingerprint in the access manager, yous can use your fingerprint to log into those applications and web sites.

Depending on the model and the year information technology was purchased, HP provides a number of access managing director applications. Use the table below to decide which access manager software was bachelor at the time the computer was purchased.

HP Fingerprint Reader Software
Software Proper noun	2007	2008	2009	2010	2011
Verisoft Access Manager			-	-	-
HP Security Suite			-	-	-
Digital Persona Fingerprint Reader	-	-			-
HP ProtectTools Security Manager	-	-

The access manager software is designed to work on specific models and operating systems. You need to update information technology for the original configuration of your notebook on the HP support web site.

To update your fingerprint reader's admission director software:

2. Select the current operating organisation, and then curl downwards to Software - Security, and expand the listing. The fingerprint access managing director software is listed. Notation the version number and engagement.

3. If the access manager software bachelor on the spider web site is newer than the version installed on your notebook, download and install it.

After updating the access managing director, come across the access director online help for information on setting it upwardly.

Detect new device drivers if yous changed operating systems

The fingerprint device drivers and security software are designed for specific operating organization. If y'all choose to change the Os, you may have trouble setting up the fingerprint reader again. The post-obit data may help troubleshoot problems.

If irresolute to XP, some security applications (such as SimplePass and Digital Persona) practice not have an XP version. You volition take to locate and purchase a tertiary political party security program.

Source: https://support.hp.com/hr-en/document/c02519007

Posted by: sosapriece.blogspot.com

Share this post